TM 5-5420-202-20-2
FUEL SHUTOFF HANDLE REPLACEMENT (Sheet 1 of 2)
TOOLS: 1/2 in. combination box and open end wrench
9/16 in. combination box and open end wrench
Pin punch 1/8 inch
Ball peen hammer
Slip joint pliers
Vise
REFERENCE:
REMOVAL:
1. Release spring (A) securing handle (B).
2. Hold extension (C) with 1/2 inch wrench while loosening jamnut (D) with 9/16 inch wrench,
NOTE
If necessary, grip cable (E) with pliers to remove
handle (B) and extension (C).
3. Remove handle (B) and handle extension
(C) as assembly from cable (E).
4 . Remove jamnut (D).
DISASSEMBLY:
1. Using vise to hold handle (B)
drive two pins (F) out of
handle (B) with hammer and
pin punch.
2. Separate handle (B) from
extension (C).
Go on to Sheet 2
