TM 5-5420-202-202
HOSE ASSEMBLY (TO PRIMARY FUEL FILTER) REPLACEMENT (Sheet 1 of 2)
TOOLS: 7/8 in. open end wrench
1-1/8 in. open end wrench
1-3/16 in. open end wrench
Lint-free cloth (Item 12, Appendix D)
SUPPLIES:
Container
powerplant (page 5-2)
Remove
P R E L I M I N A R Y PROCEDURE:
NOTE
Use suitable container to catch
fuel spillage whenever any fuel
line or fitting is loosened or re-
moved. Use cloth to wipe any
spillage. D i s c a r d c l o t h a n d
drained fuel in accordance with
local procedures.
REMOVAL:
Using 7/8 inch wrench, remove
1.
hose assembly (A) from primary
f u e l filter.
Using 1-1/8 inch wrench and 1-3/16
2.
inch wrench, disconnect coupler
assembly (B) from hose assembly (A).
C L E A N I N G AND INSPECTION:
Using clean cloth, clean hose assembly (A).
1.
Inspect hose assembly (A) for cracks and breaks. If damaged, replace hose assembly (A).
2.
Go on to Sheet 2
