TM 5-5420-202-20-2
FUEL SHUTOFF HANDLE REPLACEMENT (Sheet 2 of 2)
ASSEMBLY:
1.
Position handle extension (A) in handle (B)
and support in a vise.
2.
Using hammer, tap two pins (C) into holes in
handle (B) to secure extension (A). Remove
assembly from vise.
INSTALLATION:
1. Thread jamnut (A) onto cable (B).
2. Thread handle (C) and extension (D) as
an assembly all the way onto cable (B).
3. Using 1/2 inch wrench to hold extension (D)
and 9/16 inch wrench on jamnut (A), tighten
jamnut against handle assembly (C) and (D).
4. Close spring (E) to secure handle
(C) in place.
End of Task
7-172