TM 5-5420-202-20-2
ENGINE COOLING FAN REPLACEMENT (Sheet 2 of 4)
NOTE
Both engine cooling fans are replaced the same.
REMOVAL:
1.
Using 9/16 inch socket, remove four screws and Iockwashers (A) holding fan cover (B)
to engine.
2.
Remove fan cover (B).
Using slip joint pliers remove cotter pin (C).
3.
Using 1-1/4 inch socket, remove hex
4.
nut and flat washer (D) holding fan to
shaft (E).
Remove assembled fan and hub (D) from
5.
shaft (E).
Go on to Sheet 3
9-56
