TM 5-5420-202-20-3
DOME LIGHT RESISTOR ASSEMBLY BRACKET REPLACEMENT (Sheet 1 of 1)
TOOLS: 7/16 in. socket with 1/2 in. drive
5 in. extension with 1/2 in. drive
Ratchet with 1/2 in. drive
Lockwashers (2 required)
SUPPLIES:
PRELIMINARY PROCEDURES: Remove resistor assembly (page 10-201)
REMOVAL:
1. Using socket and extension, remove two
screws (A) and lockwashers (B).
2. Remove bracket (C).
INSTALLATION:
1. Position bracket holes with holes in domelight
assembly (D).
2. Place lockwashers (B) on two screws (A).
3. Insert through holes in positioned parts of step 1.
4. Using socket and extension, tighten screws (A).
5. Install resistor assembly (page 10-202).
TA249144
End of Task