TM 5-5420-202-20-3
LEFT TAILLIGHT STOPLIGHT ASSEMBLY REPLACEMENT (Sheet 1 of 3)
TOOLS: 9/16 in. combination box and open end wrench
Silicone compound (Item 32, Appendix D)
SUPPLIES:
1/2 in. masking tape (Item 58, Appendix D)
Lockwashers (2 required)
REFERENCE:
Remove transmission shroud (page 9-2)
PRELIMINARY PROCEDURES:
NOTE
Inspect leads ( A ) and leads (B) for
n u m b e r e d tags (C). If leads do not
have tags, use masking tape and pen-
cil to number leads 21, 22, and 24.
Reach through exhaust door opening and using fingers
1.
disconnect three leads (A) from hull con-
nectors (B).
2.
Slide three connector shells (D) back on
taillight leads to expose three slotted
washers (E).
NOTE
S i l i c o n e compound may be needed
o n leads (A) to remove shells (D).
Remove three slotted washers (E) and three
3.
shells (D).
TA249145
Go on to Sheet 2