TM 5-5420-202-20-3
MAIN POWER WIRING HARNESS DISCONNECT (Sheet 7 of 7)
8.
Using spanner wrench connect main power wiring harness (D) (CKT 81) to master power relay (Y).
9.
Using 7/16 inch socket and ratchet remove 10 screws (A) 10 washers (B) and 5 clamps (C) securing main power
wiring harness (D) along right side of hull.
10. Connect main power wiring harness lead (E) (CKT 920A) going to smoke generator wiring harness (F).
11. Connect bulkhead connectors (page 10-269).
12. Install Right side battery cover (page 10 -253).
13. Connect three battery ground straps (page 10-268).
End of Task
Change 7
10-296.87
