TM 5-5420-202-20-3
DUST DETECTOR WARNING LIGHT BOX ASSEMBLY AND MOUNTING BRACKET
REPLACEMENT (Sheet 1 of 2)
Pliers, slip joint, plastic jaw insert
TOOLS:
7/16 in. combination box and open end wrench (2 required)
Lockwasher (4 required)
SUPPLIES:
REMOVAL:
Using pliers, disconnect harness connector (A)
1.
from dust detector warning light box assembly (B).
2.
Using wrenches, remove two screws
(C), lockwashers (D), and nuts (E)
securing dust detector warning light
box assembly (B) to mounting bracket (F).
Remove dust detector warning light box
3.
assembly (B).
4.
If necessary, use wrench to remove two
screws (G) and lockwashers (H) securing
mounting bracket (F) to vehicle.
Go on to Sheet 2