TM 5-5420-202-20-3
SHIFT LINKAGE ADJUSTMENT (Sheet 1 of 28)
7/16-in. socket with 1/2-in. drive
TOOLS:
Ratchet with 1/2-in. drive
9/16-in. combination box and open end wrench (2 required)
Torque wrench with 1/2-in. drive (0 to 175 lb-ft) (0 to 237 Nm)
7/16 in. combination box and open end wrench
Bench vise
9/16-in. socket with 1/2-in. drive
9/16 in. crowfoot adapter with 3/8 in. drive
SUPPLIES:
Locating pins (1/8-in. diameter by 2-1/2 in. long copper rod). Wire (0.06 in.
diameter by 2-in. long) (Item 61, Appendix D)
REFERENCE:
PRELIMINARY
PROCEDURES:
Block tracks and place transmission shift lever in neutral
Remove top deck (page 16-21)
Remove transmission shroud (page 9-2)
Go on to Sheet 2