TM 5-5420-202-20-3
GREASE ACTUATED TRACK ADJUSTING LINK REPAIR (Sheet 1 of 4)
PROCEDURE INDEX
PAGE
PROCEDURE
Disassembly
Inspection
Assembly
7/16 in. socket with 1/2 in. drive
TOOLS:
3/4 in. socket with 1/2 in. drive
15/16 in. socket with 1/2 in. drive
Ratchet with 1/2 in. drive
Torque wrench with 1/2 in. drive (0-175 lb-ft) (0-236 N.m)
10 in. adjustable wrench
Hammer
Chisel
Center punch
Bench vise with soft jaws
Bearing driver (Item 30.2, Chapter 3, Section I)
SPECIAL TOOLS:
Gloves (Item 69, Appendix D)
SUPPLIES:
Brush (Item 10, Appendix D)
Goggles (Item 70, Appendix D)
Rag, wiping (Item 65, Appendix D)
Dry cleaning solvent (Item 55, Appendix D)
Packing
Lockwashers (2 required)
REFERENCES: None
Remove grease actuated track adjusting link from vehicle
PRELIMINARY
PROCEDURE:
Go on to Sheet 2
14-106