TM 5-5420-202-20-4
REAR DRAIN VALVE LINKAGE ADJUSTMENT (Sheet 1 of 7)
TOOLS: 9/16 in. combination box and open end wrench (2 required)
Slip joint pliers
1/8 in. dia. alinement pin (2 in. long)
6 in. steel rule
SUPPLIES:
Cotter pins (2 required)
REFERENCE:
1.
Using pliers, remove cotter pin (A) from clevis pin (B).
2.
Pull clevis pin (B) out of holes in clevis (C).
3.
Put alinement pin (D) through hole in bracket (E) and hole in lever (F).
4.
Using 9/16 inch wrench, loosen jamnut (G) all the way while holding clevis (C) with pliers.
Go on to Sheet 2
TA248571