TM 5-5420-202-20-4
PERSONNEL HEATER MOUNTING CLAMP REPLACEMENT (Sheet 1 of 1)
Flat-tip screwdriver
TOOLS:
Metal cutting shears
PRELIMINARY PROCEDURE: Set MASTER HEATER switch to OFF (TM 5-5420-202-10)
REMOVAL:
Using screwdriver, remove either one or all three clamps (A), as necessary.
1.
If clamps are too rusted or old to remove, use screwdriver and pry clamp away from
2.
mounting bracket (B) or heater (C). Then, using shears, cut clamp free.
INSTALLATION:
Install new clamp (A) around mounting brackets (B) or heater (C), as necessary.
1.
Using screwdriver, tighten clamp (A).
2.
TA248614
End of Task
