TM 5-5420-202-20-4
INTERIOR RELEASE MECHANISM REPAIR (Sheet 1 of 11)
PROCEDURE INDEX
PROCEDURE
PAGE
Disassembly
Cleaning and Inspection
Assembly
TOOLS: Pliers
5/16 in. combination box and open end wrench
Flat-tip screwdriver
Long round nose pliers (needle nose)
Ball peen hammer
3/32 in. drive punch
3/16 in. drive punch
Vise
SUPPLIES:
Spring pins (five)
Dry cleaning solvent (Item 55, Appendix D)
Cleaning fluid (Item 36, Appendix D)
Cooking stove
Water
Gloves (Item 69, Appendix D)
Cotter pins
Goggles (Item 70, Appendix D)
PRELIMINARY PROCEDURES:
Remove interior release mechanism and mounting bracket
NOTE
Position interior release mechanism in vise as
necessary to accomplish disassembly and
assembly.
DIS ASSEMBLY:
1.
Using wrench, remove two screws
(A) holding bracket (B) to release
mechanism (C). Remove bracket
(B), fuel shutoff switch (D), and
instruction plate (E) from release
mechanism (C).
Go on to Sheet 2
TA248686