TM 5-5420-202-20-4
INTERIOR RELEASE MECHANISM REPAIR (Sheet 4 of 11)
Using 3/16 inch punch and hammer, remove
8.
straight pin (T), bushing (U), spacer (V),
and pawl (W) from bracket (R).
Using 3/16 inch punch and hammer,
9.
drive spring pin (X) out of cam (Y).
Throw spring pin (X) away.
Using 3/16 inch punch and hammer,
10.
drive spring pin (Z) out of lever (AA).
Throw spring pin (Z) away.
Pull lever pin (AB) out of bracket (R).
11.
Remove two thrust washers (AC), lever
(AA), cam (Y), and lever (P).
Remove plastic grommet (AD) from
12.
bracket (R) if cracked or worn or does
not fit properly.
TA248689
Go on to Sheet 5
20-31