TM 5-5420-202-34
NOTE
Coat cylinder hole, valve seat, and valve cup
with hydraulic fluid.
ASSEMBLY:
1.
Place cylinder (A) in vise with bore facing
up.
Install seat (B) with flat portion facing
2.
down into cylinder (A).
3.
Install spring (C) and valve (D) into retainer
(E). Press down and turn to seat valve
(D) into retainer (E).
Place retainer (E) into spring (F).
4.
Place cup (G) over end of spring (F).
5.
6. Install spring (F) with assembled components
(E and G) into cylinder (A).
7. Insert piston (H) and washer (J) into cylinder
(A).
Using screwdriver, press down on piston
8.
(H), install retaining ring (K).
Go on to Sheet 5
8-5