TM 5-5420-202-34
BRAKE SLAVE CYLINDER REPAIR (Sheet 3 of 6)
8. Insert screwdriver through hole in cylinder (A) at
point (N), and push piston (P) and related parts
from slave cylinder (A). Throw away piston (P)
and related parts.
CLEANING AND INSPECTION:
Dry cleaning solvent P-D-680 is toxic and flammable. To avoid
injury, wear protective goggles and gloves and use in a well-
ventilated area. Avoid contact with skin, eyes, and clothes, and
do not breathe vapors. Do not use near open fire or excessive
heat. The flash point for Type I dry cleaning solvent is 100F
(38C) and for Type II is 138F (50C). If you become dizzy while
using dry cleaning solvent, get fresh air immediately and get
medical aid. If contact with eyes is made, wash your eyes with
water and get medical aid immediately.
Clean slave cylinder and parts not discarded using dry
Remove slave cylinder from vise.
1.
cleaning solvent and clean rags.
2. Visually inspect cylinder hole for scratches. Replace slave cylinder if unserviceable.
Go on to Sheet 4
Change
2
8-9
