ARMY TM 5-5420-212-10-1
MARINE CORPS TM 08676A-10/1-1
(10) Move vehicle toward bridge slowly.
(11) Guide end of push bar into opening of cross girder.
(12) Move push bar as needed to align holes in push bar and girder (if connecting to bankseat beam, see
para. c.).
(13) Put bracing pin in girder until fully seated.
c.
Connecting Push Bar to Bankseat Beam
When connecting the push bar to the bankseat beam, use a launching nose pin, secured with a retainer clip. The
push bar must be the correct way up so the recess in the swivel end allows the push bar to articulate.
4-67
