ARMY TM 5-5420-212-10-1
MARINE CORPS TM 08676A-10/1-1
(2)
Attach anchorage lug to end of pin, and secure with retaining pin and retainer clip.
(3)
Attach loop(s) of approach guy cable(s) to lug(s) with bracing pin and secure with retainer clip.
(4)
Coil cable(s) on top of panels, and secure to carrying bar bracket with light rope.
(5)
Insert near bank anchorage pins, instead of panel pins, in junction of next to last, and last bay of bridge.
Anchorage pin must be inserted from inside of bridge.
(6)
Coil cable(s) on top panel [as in step (4)].
NOTE
The following step can be performed immediately after arrival on site, depending on the
availability of personnel. When only two cables are used, use position of inside holdfasts.
5-48
