TM 5-5420-226-20-2
POWERPLANT TESTS (GROUND HOP) (Sheet 16 of 16)
After Test Disconnect (Sheet 1 of 1 )
1. Disconnect three battery ground straps (page 10-268).
2. Disconnect four electrical cable assemblies and three hose assemblies from powerplant and hull
3. Remove fabricated tachometer assembly,
4. Using 7/16-inch socket with ratchet, loosen clamp nut
that secures right ground hop hose assembly clamp.
5. Remove ground hop hose assembly with clamp
and filter from turbosupercharger elbow.
6.
Position air cleaner hose assembly with clamp
to right turbosupercharger elbow.
7.
Using 7/16-inch socket with ratchet, tighten
clamp nut to secure air cleaner hose asembly to
turbosupercharger elbow.
Repeat steps 4 through 7 on left side.
8.
Install powerplant (page 5-14).
9.
End of Task
