LEFT OR RIGHT REAR POWERPLANT GUIDE REPLACEMENT

TM 5-5420-226-20-2

LEFT OR RIGHT REAR POWERPLANT GUIDE REPLACEMENT (Sheet 1 of 2)

TOOLS: 9/16 in. combination box and open end wrench

1/2 in. drive hinged handle (breaker bar)

Ball peen hammer

Long round nose pliers

Slip joint pliers

Chisel

Brass drift

SUPPLIES:

Connecting ring 8744683

Sleeve bearing 5160090

Wood block, 4 x 6 (approximately)

REFERENCE:

TM 9-237

P R E L I M I N A R Y PROCEDURE:

Remove powerplant (page 5-2)

REMOVAL:

Using wrench, remove screw (A), lockwasher (B), and flat washer (C) securing rear power-

plant guide (D) to support (E).

Using hammer, tap guide (D) from mounting place. Remove guide from vehicle.

Using brass drift, drive bearing (F)

from support.

Using long nose pliers, remove cotter

pin (G) and latch (H).

Using chisel, cut ring (J).

Using slip joint pliers, separate ring

(J) and remove ring (J), spring (K), and

pin (L).

Go on to Sheet 2