TM 5-5420-226-20-2
ENGINE MOUNTS (LEFT AND RIGHT) REPLACEMENT (Sheet 1 of 3)
TOOLS: T-slide handle with 3/4 in. drive (2 required)
36 in. extension (cheater bar)
1-1/8 in. socket with 3/4 in. drive
Ratchet with 3/4 in. drive
1/2 in. socket with 1/2 in. drive
Ratchet with 1/2 in. drive
1-1/8 in. open end wrench
SUPPLIES:
Drycleaning solvent (Item 55, Appendix D)
Rags (Item 12, Appendix D)
PRELIMINARY PROCEDURE:
Remove powerplant (page 5-2).
NOTE
Removal and installation of left and right
engine mounts are the same.
REMOVAL:
1. Using 1/2 inch socket, remove two
screws (A) and washers (B) from bracket
(c).
TA107475
Go on to Sheet 2