TM 5-5420-226-20-2
TRANSMISSION OIL COOLER REPLACEMENT (Sheet 3 of 10)
6.
Using plastic barrier material and
masking tape, wrap ends of hoses
(E and F) and transmission connectors
(D) to keep out dirt.
7.
Place drip pan or rags under cooler
connectors (G).
8.
Using 1-5/8 inch wrench, remove hose
(H) at cooler connectors (G).
Using 1-5/8 inch wrench, remove hose
9.
(J) at cooler connector (G).
10.
Using plastic barrier material and masking tape, wrap ends of hoses (H and J) and cooler
connectors (G) to keep out dirt.
11.
Move hoses out of the way toward rear of powerplant.
Go on to Sheet 4
TA107510
6-40