TM 5-5420-226-20-2
LOWER OIL FILLER TUBE AND HOSE REPLACEMENT (Sheet 1 of 2)
TOOLS: 5/16 in. socket with 1/2 in. drive
5 in. extension with 1/2 in. drive
1/2 in. open end wrench
Putty knife
Ratchet with 1/2 in. drive
SUPPLIES:
Gasket 8682523
Drycleaning solvent (Item 55, Appendix D)
Rags (Item 12, Appendix D)
PRELIMINARY PROCEDURE:
Remove powerplant (page 5-2)
REMOVAL:
NOTE
Clean all parts and general area prior to removal.
1.
Using 5/16 inch socket, loosen two clamps (A) from hose (B).
2.
Using 1/2 inch wrench, remove three screws (C) and lockwashers (D) from tube assembly
(E).
Pull tube assembly (E) and hose (B) loose and slip off two clamps (A).
3.
4.
Using putty knife, remove gasket (F) and throw away.
G O on to Sheet 2
TA107557