ENGINE SHROUD REPAIR OFF ENGINE

5-5420-226-20-2

ENGINE SHROUD REPAIR OFF ENGINE (Sheet 1 of 2)

TOOLS:

Putty knife

Ratchet with 1/2 in. drive

7/1 6 in. socket with 1/2 in. drive

SUPPLIES:

Dry cleaning solvent (Item 55, Appendix D)

Rags

Adhesive (Item 4, Appendix D)

Insulation

PRELIMINARY

PROCEDURES:

Remove engine shroud (page 9-30).

DISASSEMBLY:

Using

socket,

remove

six

screws (A), lockwashers (B),

and flat washers (C) securing

r e t a i n e r (D) to engine shroud

(E) both sides.

Using socket, remove

six screws (F), lockwashers

(G), and flat washers

(H) securing retainer

(J) to engine shroud

(E) both sides.

Remove retainers

(D) and (J).

Using putty knife,

remove insulation

(K) and (L) from both

sides of engine shroud

(E).

Using dry cleaning

solvent and rags, clean

areas where insulation

(K) and (L) were removed.

TA107987

Go on to Sheet 2