TM 5-5420-226-20-2
TRANSMISSION SHROUDS REPLACEMENT (Sheet 8 of 8)
Left Intermediate Shroud Replacement (Sheet 1 of 1)
TOOLS:
1/2 in. socket with 1/2 in. drive
Ratchet with 1/2 in. drive
1/2 in. combination box and open end wrench
PRELIMINARY
PROCEDURES:
Remove powerplant (page 5-2)
Remove oil filler (upper) tube (page 6-84)
REMOVAL:
1.
Using socket and wrench, remove screw, lockwasher, and nut (A).
2.
U s i n g wrench or socket, remove seven screws and washers (B) securing intermediate
shroud (C) to engine.
Remove intermediate shroud (C).
3.
INSTALLATION:
1.
Position intermediate shroud (C) into place, on engine.
2.
Install seven screws and washers (B) to secure intermediate shroud (C) to engine.
Install screw, lockwasher, and nut (A).
3.
Using wrench and socket, tighten screws (A and B).
4.
5.
Install engine oil filler tube (page 6-86).
6.
Install powerplant (page 5-14)
TA107984
End of Task
