TM 5-5420-226-20-3
BRAKE LEFT HAND SLAVE CYLINDER AND TUBE ASSEMBLY REPLACEMENT (Sheet 4 of 4)
Remove plastic cap from tee (G) and plastic plug and masking tape from tube assembly
5.
(H).
6.
Thread nut of tube assembly (H) on
tee (G) finger tight.
7.
Position two new gaskets (J) and end
of tube assembly (H) over part in slave
cylinder (B).
8.
Insert bolt (K) and tighten finger tight.
Using 13/16 inch wrench, tighten
9.
bolt (K).
10.
Using 11/16 inch wrench, tighten nut of
tube assembly (H) to tee (G).
11.
Install powerplant (page 5-14).
Perform brake bleeding procedure (page
12.
Place shift lever in P (park) position and remove blocks from track (TM 5-5420-226-10).
13.
End of Task
TA169182
13-57