TM 5-5420-226-20-3
BRAKE CONTROL HOUSING REPAIR (Sheet 1 of 14)
PROCEDURE INDEX
PAGE
PROCEDURE
Removal
Cleaning and Inspection
Installation
7/16 in. socket with 1/2 in. drive
Retaining ring pliers (external)
TOOLS:
Ratchet with 1/2 in. drive
6 in. steel rule
Slip joint pliers
1/4 in. drive punch
15/16 in. open end wrench
1/2 in. drive punch
15/16 in. socket with 1/2 in. drive
Hammer
9/16 in. socket with 1/2 in. drive
7/8 in. combination box and
Torque wrench with 1/2 in. drive
open end wrench
9/16 in. combination box and
(0-175 lb-ft) (0-237 Nm)
open end wrenches (two)
5 in. extension with 1/2 in. drive
9/16 in. deep well socket with 1/2 in. drive
3/4 in. socket with 1/2 in. drive
Cotter pins (two)
SUPPLIES:
Gasket 10911888
Preformed packings MS28775-112 (6 required)
Dry cleaning solvent (Item 55, Appendix D)
Shims 11655170
Rags (Item 65, Appendix D)
Stud
Remove powerplant (page 5-2)
PRELIMINARY PROCEDURES:
Remove slave cylinders (pages 13-54, 13-58) (as applicable)
REMOVAL:
NOTE
Clean all parts and general area prior to disassembly
Go on to Sheet 2
