TM 5-5420-226-20-3
TORSION BAR ANCHOR REPLACEMENT (Sheet 1 of 3)
Pry bar
TOOLS:
Putty knife
Portable drill and drill set
3/4 in. socket with 1/2 in. drive
Ratchet with 1/2 in. drive
Extractor tool set
Crowbar
Gasket
SUPPLIES:
Pins (2 required)
Lockwashers (4 required)
Corrosion preventive (Item 76, Appendix D)
Solid film lubricant (Item 77, Appendix D)
Remove torsion bar from exact opposite side
PRELIMINARY PROCEDURE:
of vehicle (page 14-26).
REMOVAL:
.
1. Using socket, remove four
screws (A) and lockwashers (B)
securing cover (C) to roadwheel
housing (D).
2. Using prybar, pry cover (C) free from
housing (D).
3. Remove cover (C), gasket (E), and
anchor (F) as assembly from housing (D).
Discard gasket (E).
Go to Sheet 2
