TM-5-5420-279-10
Tilt Roller Shootbolt Positions
4.9.1.3
Remove the lower shootbolt (2) securing the tilt roller head (4) in position.
4.9.1.4
Rotate the tilt roller head (4) outwards.
4.9.1.5
Remove tilt roller leg shootbolt (3) whilst supporting the weight of the tilt roller
assembly.
4.9.1.6
Rotate the tilt roller assembly to the vertical position.
4.9.1.7
Secure in the vertical position with upper shootbolt (1).
4.9.1.8
Fold out the folding sections of the tail lift platform, extend the sliding sections of the
tail lift and erect the guardrails.
WARNING
CRUSH HAZARD. DEATH OR PERSONAL INJURY CAN RESULT IN THE EVENT OF A
SUSPENDED LOAD FALLING FROM THE CRANE. DO NOT STAND CLOSE TO LOADS
SUSPENDED FROM THE CRANE.
4.9.1.9
Operate the lift and traverse controls on the crane and position the crane to lift the far
bank end beam from the flatrack T1.
4-48
