TM 55-1945-205-24-2
0268 00 2
0268 00
a.
Remove lock nut (2) and washer (3) from shift lever pin (4).
b.
Remove shift control cable (1) from shift lever pin (4).
c.
Remove shift control cable (1) from cable retainer (5) by removing screw (6).
CAUTION
The throttle control cable is secured by the rubber grommet near the shift control
cable. Care must be given to ensure the throttle control cable is not damaged during
grommet removal.
d.
Remove rubber grommet (7) from anchor block pocket (8) on front of lower engine cover (9).
e.
Remove shift control cable (1) from rubber grommet (7).
f.
Return rubber grommet (7) to anchor block pocket (8).
2.
Remove and discard all in line tiedown straps.
3.
Remove and retain all in line wire bundle clamps.
4.
Remove shift control cable (1) and discard.
INSTALL RHIB SHIFT CONTROL CABLE
NOTE
Both the throttle and shift control assembly and the engine gearcase must be in neutral
positions prior to installation of the shift control cable.
1.
Lay out new shift control cable (1) between operators console and engine, providing a slack area in front of the
engine to allow for engine movement.
2.
Install RHIB throttle and shift control assembly. (WP 0269 00)
3.
Install shift control cable (1) on the engine.
7,8 (HIDDEN)
9
5,6
1
2,3,4
