TM 55-1945-205-24-20269 00 20269 002.Carefully separate six-socket plug (2) from its control receptacle (3).3.Carefully separate three-socket plug (4) from its control receptacle (5).4.Cut tiedown straps as necessary to facilitate removal of control cabling.5.Remove two nuts (6), lock washers (7), flat washers (8) and control mounting screws (9) securing control assembly (10) to starboard side of the RHIB control housing (11).6.From the inboard side of control assembly (10), loosen throttle handle allen head screw (12).7.Place a small tap punch against the allen head screw (12) and using a hammer, gently tap throttle handle (1) loose from outboard side of the control assembly (10).8.Remove throttle handle screw (12).9.Remove throttle handle (1).10. Remove three assembly screws (13) holding control assembly (10) halves together.CAUTIONCarefully separate sealed housing halves. Failure to comply could result in equipment damage.11. Separate control assembly housing (14) from control assembly cover (15).10C194-2231425212422261519162018172728
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
