LOADING BAY FROM GROUND (Contd)
Failure to ensure front pin lock jaws and rear guides
lock bay trunnions after bay is loaded on BAP may
result in a lost bay or transporter rollover during
transport. Failure to comply may result in damage to
equipment and possible injury or death to personnel.
z. Ensure both front pin locks (3) and rear guides (2) are engaged.
Ensure tension on winch cable is released to avoid
undue strain on winch frame and cable during transit.
Failure to comply may result in damage to equipment.
aa. Hold WINCH switch (5) in OUT position until tension on winch cable (1) is
ab. Turn PTO ENGAGE switch (9) to OFF.
ac. Disconnect RCU cable (6) from receptacle (7), and stow remote control
unit (4) and RCU cable (6) in stowage box (8).
END OF WORK PACKAGE