TM 5-5420-202-20-2
WATER SEPARATOR FUEL FILTER OUTLET HOSE ASSEMBLY REPLACEMENT (Sheet 1 of 3)
TOOLS: 9/16 in. combination box and open end wrench
7/8 in. combination box and open end wrench
SPECIAL TOOLS:
Ground hop kit (Item 31, Chapter 3, Section I)
SUPPLIES:
Rags (Item 65, Appendix D)
Gloves (Item 69, Appendix D)
Sealing compound (Item 27, Appendix D)
Goggles (Item 70, Appendix D)
Drain pan
Dry cleaning solvent (Item 55, Appendix D)
P R E L I M I N A R Y PROCEDURES:
Remove powerplant (page 5-2)
Drain fuel-water separator (page 7-21, steps 1 thru 6)
REMOVAL:
NOTE
Use suitable container to catch
1. Using 9/16 inch wrench, remove self-locking
fuel spillage whenever any fuel
nut (A) and hose clamp (B) from hose assembly
line or fitting is loosened or re-
(C).
moved. Use cloth to wipe any
spillage. Discard cloth and
2. Using 7/8 inch wrench, remove hose assembly (C)
drained fuel in accordance with
from bulkhead elbow (D).
local procedures.
Go on to Sheet 2
