TM 5-5420-202-20-2
TUBE ASSEMBLY (FUEL INJECTION PUMP INLET TO BULKHEAD ELBOW)
REPLACEMENT (Sheet 5 of 5)
7.
Using fingers, install two tube clamps (H)
on tube assembly (A).
Using 3/8 inch socket and 5/16 inch wrench,
8.
install two screws and self-locking nuts
(J) through tube clamps (H).
Install cooling fans (page 9-57).
9.
10.
Install ground hop kit (page 5-27).
11.
Perform powerplant test run (page 5-30).
12.
Disconnect ground hop kit (page 5-40).
13.
Install powerplant (page 5-14).
End of Task
7-33
