TM 5-5420-202-20-2
ENGINE FUEL RETURN HOSE REPLACEMENT (Sheet 2 of 2)
INSTALLATION:
Using 1 inch wrench on hose assemblies (A) and (B), and 1-3/8 inch wrench on coupling
1.
(C), connect coupling (C) and hose assemblies (A) and (B) together.
Position assembled hose assemblies (A) and (B) with coupler (C) into vehicle and connect
2.
fitting (D) to nut (E) finger tight.
3.
Position tube assembly (F) into vehicle and install nut (G) to elbow (H) finger tight.
Using 7/16 inch socket, install clamp (J), lockwasher (K), and screw (L) to tube assembly
4.
(F).
5.
Using 1 inch wrench on fitting (M) and 1-1/8 inch wrench on nut (N) connect hose assembly
(A) to tube assembly (F).
6.
Using 1 inch wrench on fitting (D) and 1-1/8 inch wrench on nut (E) tighten nut (E).
Using adjustable wrench to hold elbow (H), use 1 inch wrench to tighten nut (G).
7.
Install transmission shroud (page 9-6).
8.
End of Task