TM 5-5420-202 -20-2
TURBOCHARGER SHROUDS REPLACEMENT (Sheet 3 of 5)
Inner Shroud Replacement (Sheet 3 of 3)
INSTALLATION:
Place inner shroud (A) into position.
1.
2.
Install grommet (B) on hose assembly (C).
Install grommet (B) and hose assembly (C) in inner shroud (A).
3.
Install three screws and washers (D) securing inner shroud (A)
4.
to oil cooler frame.
Install screw, lockwasher, and nut (E) to secure inner shroud
5.
(A) to upper shroud (F).
Install four screws and washers (G) securing inner shroud (A)
6.
to turbocharger plate (H).
Using 1/2 inch socket, tighten four screws (G).
7.
Using 1/2 inch socket with extension, tighten three screws
8.
(D) .
Using 1/2 inch socket and 1/2 inch wrench, tight en screw and nut (E).
9.
Connect hose assembly (C) to elbow (J). Using 11/16 inch wrench,
10.
tighten hose assembly (C) onto elbow (J).
Go on to Sheet 4