TM 5-5420-202-20-2
TURBOCHARGER SHROUDS REPLACEMENT (Sheet 4 of 5)
Outer Shroud Replacement (Sheet 1 of 1)
TOOLS:
1/2 in. combination box and open end wrench
1/2 in. socket with 1/2 in. drive
Ratchet with 1/2 in. drive
P R E L I M I N A R Y PROCEDURE:
Remove powerplant (page 5-2)
REMOVAL:
NOTE
Procedures for replacement of the left or right
transmission shrouds are similar. Procedures
for the left side are shown.
1.
Using 1/2 inch socket, remove
screw and lockwasher (A).
Using 1/2 inch socket and 1/2
2.
inch wrench, remove three screws,
lockwashers, and nuts (B) securing
outer shroud (C).
Remove outer shroud (C).
3.
INSTALLATION:
Position outer shroud (C) to turbocharger.
1.
2.
Install three screws, lockwashers, and nuts (-B) to secure outer shroud (C) to turbocharger.
3.
Install screw and washer (A) to secure outer shroud (C) to turbocharger.
4.
Using 1/2 inch socket and 1/2 inch wrench, tighten screws (A and B).
Install powerplant (page 5-14).
5.
End of Task
