TM 5-5420-202-20-3
Electrical WIRING HARNESS AND CABLE CONNECTOR REPAIR (Sheet 4 of 18)
Male Plug Repair (Sheet 3 of 3)
Using remover, push contact (E) into
14.
plug assembly (B).
15.
Sliding grommet (D) forward along cable
(C), set grommet (D) firmly against
contacts (E).
16.
Manually thread grommet retaining nut
(A) onto plug assembly (B).
17.
Using multimeter, check continuity
of repaired circuit.
18. Tighten or install cable clamps as required.
Connect connectors at each end of affected cable.
19.
Connect three battery ground straps (page 10-268).
20.
End of Task
TA249242
10-301
