TM 5-5420-202-20-3
TRACK SHOE PAD REPLACEMENT (Sheet 1 of 2)
T00LS: 1-1/8 in. socket with 3/4 in. drive
Ratchet with 3/4 in. drive
Ball peen hammer
T-handle with 3/4 in. drive
Torque wrench with 3/4 in. drive (0-600 lb-ft) (0-814 N m)
SPECIAL TOOLS: Track torquing tool kit (Item 11, Chapter 3, Section I)
SUPPLIES:
Track pad parts kit
REFERENCE:
Position vehicle for easy removal and installation of track
PRELIMINARY PROCEDURES:
shoe pad (TM 5-5420-202-10)
Apply parking brake (TM 5-5420-202-10)
NOTE
Track shoe pads can be removed from T142 track.
Pads can be removed from vehicle or from link
(off vehicle).
REMOVAL:
1.
Using socket with ratchet (or T-handle), loosen nut (A). Remove nut. Throw nut away.
2.
Using hammer, drive shoe pad (B) out of link (C). Throw pad away.
INSTALLATION:
1.
Position pad (B) in link (C). Screw nut (A) onto pad (B) stud.
NOTE
If track torquing tool kit is available, go to step 3. If not
available, do step 2 only.
2.
Using torque wrench, tighten nut to 260-280 lb-ft (352-379
End of Task
Change 4
