TM 5-5420-202-20-3
ENGINE ACCESS PANEL SEAL REPLACEMENT (Sheet 1 of 2)
TOOLS:
Socket handle (breaker bar)
7/16 in. socket with 1/2 in. drive
9/16 in. socket with 1/2 in. drive
Ratchet with 1/2 in. drive
5 in. extension with 1/2 in. drive
Lockwashers (42 required)
SUPPLIES:
PRELIMINARY PROCEDURE: Remove three top deck door panels (page 16-25).
Using 9/16 inch socket, remove 14 screws
(A), lockwashers (B), and flat washers
(C) seeming retainer (D) and seal (E).
Remove retainer (D) and seal (E) from
3.
Using 7/16 inch socket, remove seven
screws (G), lockwashers (H) and flat washers
(J) securing small seal (K) to support (L).
4.
Remove support (L) and small seal (K).
5.
Using 7/16 inch socket, remove 21 screws
(M), lockwashers (N), flat washers (P), and
seven straps (Q) securing large seal (R) to
top deck (F).
6.
Remove large seal (R).
Go on to sheet 2
TA249704