TM 5-5420-202-20-3
REAR TRANSMISSION ACCESS COVER REPLACEMENT (Sheet 1 of 1)
TOOLS: 9/16 in. socket with 1/2 in. drive
Ratchet with 1/2 in. drive
Putty knife
Adhesive (Item 4, Appendix D)
SUPPLIES:
Gasket
Lockwashers (8 required)
Two
PERSONNEL:
remove eight screws (B) and lockwashers
(C).
Remove access cover (A) and gasket
2.
(D).
3.
Throw gasket (D) away.
4.
Using putty knife, scrape off all gasket and
adhesive residue.
INSTALLATION:
Apply adhesive to new gasket (D).
1.
2.
With one technician holding cover (A) and
gasket (D) in position on vehicle and
another person using 9/16 inch socket,
install eight screws (B) and lockwashers
(C).
TA249706
End of Task