TM 5-5420-202-20-3
TRANSMISSION DRAIN ACCESS COVER REPLACEMENT (Sheet 1 of 1)
TOOLS: 9/16 in. socket with 1/2 in. drive
Putty knife
Ratchet with 1/2 in. drive
Pry bar
Hammer, ball peen, 2-pound
Adhesive (Item 2, Appendix D)
SUPPLIES:
Gasket
Lockwasher (6 required)
PERSONNEL:
Two
1.
Two persons crawl under rear of vehicle
and locate transmission access cover (A).
2.
With one person holding access cover (A),
second person, using socket, remove six
screws (B) and lockwashers (C).
3.
Remove access cover (A) and gasket (D)
with pry bar and hammer. Throw gasket
away.
4.
Using putty knife, scrape off all gasket and adhesive residue.
INSTALLATION:
1.
Apply adhesive to new gasket (D) and position onto access cover (A).
2.
With one person holding access cover (A) and gasket (D) in position, second person, using
socket, install six screws (B) and lockwashers (C) securing access cover (A) to vehicle.
End of Task
TA249707