TM 5-5420-202-20-4
TOOLS:
11/16 in. combination box and open end wrench
3/4 in. combination box and open end wrench
SUPPLIES:
Container
REFERENCE:
PRELIMINARY PROCEDURE: Remove engine shroud (page 9-30)
REMOVAL:
1.
Using 11/16 inch wrench, disconnect output fuel hose (A) from 45-degree elbow (B) and
90-degree elbow (C).
2.
Remove hose (A).
3.
Inspect 90-degree elbow (C) for cracks or damaged threads.
4.
If damaged or defective, using 3/4 inch wrench, remove 90-degree elbow (C) from tee
(D) and throw it away.
Go on to Sheet 2
TA248773