TM 5-5420-202-34
FINAL DRIVE REPAIR (Sheet 17 of 30)
Keep hands clear of bearing (AT)
during pressing operation. Bear-
ing will fall free of shaft and
injury could result.
85.
Repeat steps 82 and 83 until bearing
(AT) is forced from shoulder of
output shaft (AJ).
Release arbor press pressure and
86.
remove bearing remover tool and
output shaft (AJ) from press.
87.
Remove bearing remover tool from
output shaft (AJ).
88.
Remove bearing (AT) and cap
assembly (AU) from output shaft
(AJ). Dispose of old style output
shaft in accordance with AR755-1.
89.
Remove ring (AV) with eight bolts
(AL). Remove bolts (AL) from ring
(AV). Retain ring (AV).
Remove seal (AW), spacer (AX), and
90.
seal (AY) from cap (AZ). Retain
cap (AZ). Throw away seal (AW),
seal (AY), and spacer (AX).
Go on to Sheet 18
Change 2
7-17