TM 5-5420-202-34
FINAL DRIVE REPAIR (Sheet 22 of 30)
NOTE
Tag both parts of each bearing so that same
parts can be paired up later. Keep both
parts of each bearing together, except when
heating or cooling.
Place two bearings (S) (outer races with
33.
rollers) on dry ice or in refrigerator
freezer for 30 to 45 minutes.
34.
Ensure bearing bore (T) of case (U) and
bearing pocket (V) of carrier (N) are
clean, dry, and free of foreign material.
Position cap (W) in arbor press. Position
35.
seal (X) on cap (W) with rubber seal
facing down. Using wood block and
arbor press, press seal (X) into cap (W)
until seal (X) is flush with cap (W).
Go on to Sheet 23
7-22 Change 2
