TM 5-5420-226-20-2
ENGINE MOUNTS (LEFT AND RIGHT) REPLACEMENT (Sheet 3 of 3)
INSTALLATION:
Position bolt (A) through bracket (B) and install
1.
nut (C). Using 1-1/8 inch open end wrench
to hold nut (C) and 1-1/8 inch socket with
3/4 inch drive ratchet, tighten bolt (A).
Install bolt (D) through washer (E), bracket
2.
(B), mount (F), mounting (G), mount (H), and
into bushing (J). Use 1-1/8 inch socket and
3/4 inch drive ratchet and tighten bolt (D),
while holding bushing (J) with 3/4 inch T-slide
and 36 inch bar extension.
Using 1/2 inch socket and 1/2 inch drive ratchet,
3.
install two screws (K) through washers (L)
and bracket (M) into mounting (G).
4.
Install powerplant (page 5-14).
End of Task
TA107477
6-7
