TM 5-5420-226-20-2
FUEL-WATER SEPARATOR OPERATIONAL TESTS (Sheet 1 of 11)
PROCEDURE INDEX
PROCEDURE
PAGE
Manual Drain Test
Automatic Drain Test
15-Second Drain Test
Sequential Drain Test
5 in. extension with 1/2in. drive
TOOLS:
Connector pliers
Ratchet with 1/2in. drive
Adjustable wrench
1/2 in. combination box and open end wrench
l/2in. socket with 1/2in. drive
7/16 in. combination box and open end wrench
7/16 in. socket with 1/2 in. drive
9/16 in. combination box and open end wrench
One 3 ft jumper cable with alliga-
tor clips on both ends
Two 10 ft jumper cables with alligator
clips on one end and probe on other end
24 volt D.C. power source
Fuel can
SUPPLIES:
Drip pan
1/8 in. pipe plug (2 required)
Gasket
Metal container (2 gal. capacity)
PERSONNEL: Two
PRELIMINARY PROCEDURE:
Remove powerplant (page 5-2)
TA107837