TM 5-5420-226-20-2
ACCELERATOR LINKAGE ENGINE CONTROL REPLACEMENT (Sheet 1 of 3)
TOOLS:
9/16 in. socket with 1/2 in. drive
5 in. long extension with 1/2 in. drive
1/2 in. drive ratchet
7/16 in. combination wrench (2 required)
1/2 in. combination wrench
SUPPLIES:
Clean rags (Item 12, Appendix D)
Dry cleaning solvent (Item 55, Appendix D)
Pencil
Paper
PRELIMINARY PROCEDURE:
Remove driver's seat backrest (page 17-76)
REMOVAL:
1.
Using socket and extension, remove 12
screws (A) and lockwashers (B).
2.
Remove top access plate (C).
Go on to Sheet 2
TA108066