ARMY TM 5-5420-212-10-1
MARINE CORPS TM 08676A-10/1-1
(f)
When resilient mounts are compressed insert panel pin through the pin holes until shoulder touches
jaws.
(g)
Put retainer clips through the end of panel pins.
(h)
On the left side of the bankseat beam, the jaw lug is inset from the side of the bankseat beam, so the
guide pin must extend out from the last jaw lug until the shoulder of the guide pin is in line with the side
of the bankseat beam.
(i)
On the right side of the bankseat beam, the jaw lug is flush with the side of the bankseat beam, so the
guide pin is inserted until the shoulder of the pin is touching the jaw.
(18)
Position 14/24 personnel on the end taper panels and bankseat beam as described in step (16) (d). The top
panel personnel will now transfer to the end taper panels.
4-31
