ARMY TM 5-5420-212-10-1
MARINE CORPS TM 08676A-10/1-1
(9)
To connect long reinforcing link to junction block of anchor assembly, the long link is brought in behind the capsill
roller beam and positioned under the roller beam and over the cross girder and the two pieces of packing (3 in x
8 in x 36 in).
(10) Align pin holes of link with holes of anchor junction block. Use male and female guides to align pin jaws.
(11) Insert nose pin through holes in link and anchor junction block. Put retainer clip through end of nose pin.
4-55
